Looking for a bulb to determine your lamp's intensity, but don't have a dimmer? Then an amber-coloured 3-step dimmable lamp of 4.5 watts is the solution for you. This bulb is dimmable without a dimmer. You simply adjust the amount of light with the on and off switch.
3-step dimmable LED filament bulbs is a unique concept. This light source contains a built-in dimming function. This makes it easy to dim the amount of light with the on and off button, giving you the flexibility to use the bulbs as mood lighting, but also to create more light. The bulb has 3-level dimmable built-in LEDs. This means that the LED bulbs are built into the lamp together with a dimmer that can be dimmed to three different levels. You can dim the light intensity of the bulbs as follows: 100% light intensity, 50% light intensity and 7% light intensity. You can switch between the 3 light intensities by briefly switching the lamps on and off. Dimming the lamp is easy to do without the need for a separate dimmer. Please note: this light source is not compatible with external dimmers.
The colour temperature of white bulbs are expressed in Kelvin. This bulb is 2200 Kelvin, which is an extra warm white colour. The Kelvin is a spectrum where the lower the number, the warmer the light colour. Bulbs with a colour temperature of 2200K are very suitable for mood lighting, due to the warm colour they emit.
This atmospheric bulb can be placed in various spaces. This attractive lamp can be used in many places. Add atmosphere to your home by using this bulb in your pendant lamp above the dining table or in your wall lamp in the living room. Just like with indoor lighting, this bulb will not look out of place in your outdoor lighting. For example, use the bulb in a festoon belt or opt for a romantic atmosphere on your terrace by combining the bulb with a beautiful wall lamp.
Please note! This light source is only suitable for outdoor use in a fixture intended for this purpose.
When using these bulbs in festoon lighting, pay attention to the following:
1) The sealing ring must fit properly around the bulb (see the manual).
2) The fitting of the festoon cable has been mounted correctly (if you use pin cables from other suppliers, you can test this by blowing into the fitting when there is no bulb in it. If you can blow through the fitting, then the pin cable not suitable for outdoor use).