4.5W filament lamp, 2200K, amber glass, Ø60, 3-step dimmable

Do you want to determine how much light the lamp emits, but you do not have a dimmer? Then a 3-step dimmable lamp is the solution for you. This lamp is dimmable without a dimmer. You simply adjust the amount of light that the lamp emits with the on/off switch.

At full strength, this lamp with its output of 4.5 watts is perfect for effective lighting. Thanks to the built-in dimmer in the lamp, you can reduce the light intensity to 50% brightness and even 7% brightness. Thus, this lamp always radiates a light that suits your situation. The amber glass gives the lamp an atmospheric appearance and the lamp would not be out of place in your indoor lighting or even outside in your barbed wire.

Dimmable without dimmer

The 3-step dimmable LED filament lamp is a unique concept. The light source features a built-in dimming function. This makes it easy to dim the amount of light with the on and off button. This gives you the flexibility to use the lamps as mood lighting, but also to create more light. You can dim the brightness of the lamps at 3 levels: 100% brightness, 50% brightness and 7% brightness. By switching the switch on and off briefly once, you change between the 3 light intensities. Dimming the lamp is easy to apply without the need for a separate dimmer. Please note that this light source is not compatible with external dimmers.

Suitable for indoor and outdoor

This atmospheric lamp with amber glass can be used in many places. Add atmosphere to your home by using this lamp in your pendant lamp above the dining table or in your wall lamp in the living room. As with the interior lighting, this lamp also does not look out of place in your outdoor lighting. Apply the lamp for example in a cable or choose a romantic atmosphere on your patio by combining the lamp with a beautiful wall lamp.

Note: this light source is only suitable for outdoor use in lighting intended for that purpose. When using the light-bulbs you should pay attention to the following:

1) The sealing ring should be properly seated around the lamp (see the manual).

2) The fitting of the light-bulb has been mounted correctly (if you use light-bulbs from other suppliers, you can test this by blowing into the fitting when there is no lamp in it. If you can blow through the fitting then the lamp cord is not suitable for outdoor use).